Glass Reflective Road Studs – Star of The Future

Why glass reflective road stud is the star of the future? Because the glass reflective road stud has many advantages that other reflective road studs do not have.

1、 The reflection performance of glass reflective road stud will not decrease with the service life.

2、 The bearing capacity of glass reflective road stud can reach more than 50 tons.

The ultra-high compressive performance of glass reflective road stud improves the application range of raised road signs. Glass reflective road stud can be used for road edge and road center. The glass reflective road stud can be used as the deceleration belt at the intersection and tunnel entrance, and the effect of reflection and deceleration warning is better than that of traditional deceleration belt.

According to Article 5.12 of GB / T 24725-2009 protruding road signs, the metal reflective film of A3 protruding reflective road studs shall be firmly bonded with the toughened glass substrate without peeling and floating. The reflection life of the glass reflective road stud depends on the reflector of the base.

The surface of the glass reflective road stud is a high temperature melt blown metal reflecting layer, which is completely fused and welded with the glass to enhance the adhesion and occlusion with the road surface. This kind of glass reflective road stud can resist the friction and corrosion of tire, sand, solvent and oil. The reflective life of glass reflective road stud can reach more than 5 years.

However, the reflective life of the glass reflective road stud sprayed with reflective layer is only about half a year. Even if the glass is not damaged, the glass reflective road stud also loses its reflective effect. It is a waste of resources to produce this kind of glass reflective road stud.